Procedure for Replacing the Flipr Analyzer's Electronic Silo

Procedure for Replacing the Flipr Analyzer's Electronic Silo

Procedure for Replacing the Flipr Analyzer's Electronic Silo

This step-by-step guide will help you replace the central silo of your Flipr analyzer with ease. The entire process takes approximately 7 minutes.

Required Tools:

  • A Phillips screwdriver (PH2).
  • A cloth or paper towel.

Detailed Steps

1. Disassembling the Flipr Analyzer (approximately 3 minutes)

  1. Unscrewing the top cover:

    • Firmly hold the top part of the device.
    • Twist the slotted or solid cover counterclockwise to remove it.

  2. Accessing the internal screws:

    • Locate the two screws holding the upper shell and the central shell together. Unscrew them using the Phillips screwdriver (PH2).
    • Handle the screws carefully to avoid losing them.

  3. Separating the shells:

    • Place the device on a flat, stable surface.
    • Turn the analyzer upside down, holding it by the upper shell.
    • Gently pull the central shell upward to remove it.
    • Retrieve the central silo, which contains the device's electronics.

Note: Some models feature a black silicone safety seal. This seal will tear during the opening process, which is completely normal.

2. Replacing the Central Silo (approximately 1 minute)

  1. Take the new central silo.
  2. Insert it into the central shell, aligning the tab at the base of the silo with the designated rails.
  3. Ensure it slides into place without forcing it.

3. Reassembling the Flipr Analyzer (approximately 3 minutes)

  1. Positioning the probes:

    • Verify that the silo’s probes are aligned parallel to the screw holes and correctly oriented.

  2. Reassembly:

    • Replace the central shell over the new silo.
    • Tighten the two screws using the Phillips screwdriver.
    • Reattach the slotted or solid cover.

  3. Finalization:

    • Hold the device by the base of the central silo to keep the parts in place.
    • Tighten all components to ensure proper sealing.

Congratulations!

The electronic silo replacement is complete. Your Flipr analyzer is now ready to be placed back in the water and resume its functionality.


    • Related Articles

    • Passerelle Flipr Connect ne se connecte pas au wifi ou à Flipr AnalysR

      Flipr Connect est une passerelle (gateway) qui permet de connecter Flipr AnalysR à votre réseau wifi. L'utilisation de Flipr Connect est donc indispensable au bon fonctionnement de votre analyseur Flipr. Si vous n'arrivez pas à obtenir des mesures ...

    • Flipr Connect

      The Flipr Connect gateway is a device that collects the measurements emitted by your Flipr and retransmits them to our servers through your Wifi network. It is imperative to provide it with the connection information of your Wifi network. Flipr ...

    • flipr controlR (Formerly Hub)

      User guide Us guide CTAC-TECH company, 5 Esplanade Compans Caffarelli Building A - CS 57130 - 31071 TOULOUSE CEDEX 7 Version: Flipr HUBcontact@flipr.fr Maximum characterization Flipr HUB works with mono and three-phase to be compatible with a large ...

    • Flipr - Installation and User Guide

      Swim in happiness starts here! Shortly, Flipr AnalysR will be prepared to operate in your swimming pool or spa. We are thrilled to have you as part of our user community. At Flipr, we are committed to making pool maintenance as easy as possible. We ...

    • Flipr Connect is not connected

      Flipr Connect V1 is a gateway designed to collect data from the Flipr sensor, including information on pool water quality such as temperature, pH, and chlorine or bromine levels. It must be properly connected to the WiFi network of your home so that ...