Wifi connect

Wifi connect

Quick installation instructions




Manual installation

  1. Connect Wifi Connect to a powered USB socket and into an area covered by wifi (close to the box).
  2. A green led should appear if the wifi connect is powered.
  3. If cuddly, then the USB port is not powered.
  4. Access the wifi settings of your phone
  5. Connect to the Wifi Connect device,
  6. Refresh your browser page or enter the pagehttp:///192.168.4.1in your browser.
  7. Follow the instructions



    • Related Articles

    • Passerelle Flipr Connect ne se connecte pas au wifi ou à Flipr AnalysR

      Flipr Connect est une passerelle (gateway) qui permet de connecter Flipr AnalysR à votre réseau wifi. L'utilisation de Flipr Connect est donc indispensable au bon fonctionnement de votre analyseur Flipr. Si vous n'arrivez pas à obtenir des mesures ...

    • Flipr Connect

      The Flipr Connect gateway is a device that collects the measurements emitted by your Flipr and retransmits them to our servers through your Wifi network. It is imperative to provide it with the connection information of your Wifi network. Flipr ...

    • Flipr Connect is not connected

      Flipr Connect V1 is a gateway designed to collect data from the Flipr sensor, including information on pool water quality such as temperature, pH, and chlorine or bromine levels. It must be properly connected to the WiFi network of your home so that ...

    • Coupure / Interruption du signal Wifi pendant l'installation

      Coupure / Interruption du signal Wifi pendant l'installation

    • How to Verify the Wi-Fi connection on your Flipr Connect

      Flipr Connect is an essential tool to monitor your pool water quality in real time thanks to the innovative technology of Flipr AnalysR V3. To make sure your Flipr Connect is properly connected to Wi-Fi, follow these simple steps: For all ...